No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display cpu-defend policy

display cpu-defend policy


The display cpu-defend policy command displays the attack defense policy configuration.


display cpu-defend policy [ policy-name ]






Displays the configuration of a specified attack defense policy.

  • If policy-name is specified, information about the specified attack defense policy is displayed.
  • If policy-name is not specified, information about all attack defense policies is displayed.

The value is a string of 1 to 31 case-sensitive characters without spaces.


All views

Default Level

1: Monitoring level

Usage Guidelines

After an attack defense policy is created, you can run the display cpu-defend policy command to view configurations of the attack defense policy.


# Display information about all attack defense policies.

<Huawei> display cpu-defend policy
 Name  : default
 Related slot : <0>
 Name  : mypolicy
 Related slot : <>

# Display information about the attack defense policy named mypolicy.

<Huawei> display cpu-defend policy mypolicy
 Related slot : <>
 Configuration :
   Rate-limit all-packets : 500(pps)(default)
Table 26-78  Description of the display cpu-defend policy command output




Name of an attack defense policy. To configure an attack defense policy, run the cpu-defend policy command.

Related slot

Board to which the attack defense policy is applied.

Rate-limit all-packets

Rate limit for all packets sent to the CPU.

To set the rate limit for all packets sent to the CPU, run the rate-limit all-packets command.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207666

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next