No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap whitelist

ap whitelist

Function

The ap whitelist command adds an RU to an RU whitelist.

The undo ap whitelist command deletes an RU from an RU whitelist.

By default, no RU is in an RU whitelist.

Format

ap whitelist { mac ap-mac1 [ to ap-mac2 ] | sn ap-sn1 [ to ap-sn2 ] }

undo ap whitelist { mac { ap-mac1 [ to ap-mac2 ] | all } | sn { ap-sn1 [ to ap-sn2 ] | all } }

Parameters

Parameter

Description

Value

mac ap-mac1

Specifies the RU MAC address.

The value is in H-H-H format. An H is a hexadecimal number of four digits.

to ap-mac2

Specifies the end MAC address. This parameter is used when you want to add multiple MAC addresses to the whitelist. The value must be larger than ap-mac1. ap-mac1 and ap-mac2 identify a range.

The value is in H-H-H format. An H is a hexadecimal number of four digits.

sn ap-sn1

Specifies the SN of an RU.

The value is a string of 1 to 31 characters.

to ap-sn2

Specifies the end SN. This parameter is used when you want to add multiple SNs to the whitelist. It must be larger than ap-sn1. ap-sn1 and ap-sn2 identify a range.

The value is a string of 1 to 31 characters.

mac all

Deletes all MAC addresses from the whitelist.

-

sn all

Deletes all SNs from the whitelist.

-

Views

WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

  • When the RU authentication mode is set to MAC address authentication using the ap auth-mode command, if the MAC address of an online RU exists in the whitelist, the RU is automatically added to the central AP. If the MAC address of an online RU does not exist in the whitelist or the RU is not added offline, the RU cannot be automatically added to the central AP. You need to run the ap-confirm command to confirm the RU.

  • When the RU authentication mode is set to SN authentication using the ap auth-mode command, if the SN of an online RU exists in the whitelist, the RU is automatically added to the central AP. If the SN of an online RU does not exist in the whitelist or the RU is not added offline, the RU cannot be automatically added to the central AP. You need to run the ap-confirm command to confirm the RU.

Prerequisites

The RU authentication mode has been set to MAC address or SN authentication using the ap auth-mode command.

Precautions

When adding multiple SNs to the whitelist, ensure that the start SN length and the end SN length are the same.

Example

# Add RU MAC address 0025-9e07-8280 to the whitelist.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap whitelist mac 0025-9e07-8280

# Add the MAC addresses from 0025-9e07-8270 to 0025-9e07-8290 to the RU whitelist.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap whitelist mac 0025-9e07-8270 to 0025-9e07-8290

# Add SN 08PE56430071 to the RU whitelist.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap whitelist sn 08PE56430071

# Add SNs from 08PE56430076 to 08PE56430081 to the RU whitelist.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap whitelist sn 08PE56430076 to 08PE56430081
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202121

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next