No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
trunk-member trap

trunk-member trap

Function

The trunk-member trap in private-mib enable command configures Eth-Trunk member interfaces to send trap messages through the private MIB.

The undo trunk-member trap in private-mib enable command configures Eth-Trunk member interfaces to send trap messages through the public MIB.

By default, trap messages of the Eth-Trunk member interfaces are sent by the public MIB.

Format

trunk-member trap in private-mib enable

undo trunk-member trap in private-mib enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

When a trunk member interface changes from Up to Down or from Down to Up, you are informed of the status change so as to check whether the device fails or recovers.

If you want to know to which trunk interface the member interface belongs, you can run the trunk-member trap in private-mib enable command to configure trunk member interfaces to send trap messages through the private MIB. This is because the trap message sent through a private MIB carries information about the trunk interface with the specified ID, whereas the trap messages sent through the public MIB do not carry information about trunk interfaces with specified IDs.

Prerequisites

The trunk interfaces are correctly configured.

Precautions

After the trunk-member trap in private-mib enable command is configured, trap messages are sent only through the private MIB. That is, you need to view the sent trap messages by using the private MIB of Huawei.

Example

# Configure the Eth-Trunk member interface to send trap messages through the private MIB.

<Huawei> system-view
[Huawei] trunk-member trap in private-mib enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 202259

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next