No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display poe-power

display poe-power


The display poe-power command displays information about the PoE power supply.

Only the AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12 support this command.


display poe-power [ slot slot-id ]





slot slot-id

Specifies the slot ID of a device.

The value is an integer, and the value is 0.


All views

Default Level

2: Configuration level

Usage Guidelines

The display poe-power displays information including the available total PoE power, percentage of the reserved power, power alarm threshold, and PoE power module.


# Display information about the PoE power supply of the devices.
<Huawei> display poe-power
Slot 0
Total Available POE Power(mW)  : 246400
Reserved POE Power Percent     : 20 %
POE Power Threshold Percent    : 90 %
    POE Power 1
    Power Value(mW)           : 123200
    Type                      : AD9430DN-12
    Supported Mode            : Redundancy, Balance
    POE Power 2
    Power Value(mW)           : -
    Type                      : -
    Supported Mode            : -

Table 4-51  Description of the display poe-power command output



Total Available POE Power(mW)

Total power that can be provided for PDs.

Reserved POE Power Percent

Percentage of the reserved power to the total power.

To set the percentage, run the poe power-reserved command.

POE Power Threshold Percent

Alarm threshold of the power consumption percentage.

To set the threshold, run the poe power-threshold command.

POE Power 1

PoE power supply 1.

POE Power 2

PoE power supply 2.

Power Value(mW)

Power of a PoE power supply.


Type of a PoE power supply, which is displayed as the name of the AP model.

Supported Mode

Supported PoE power supply mode. The value can be:
  • Redundancy: redundancy backup mode
  • Balance: current balance mode
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 246382

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next