No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
recording-scheme

recording-scheme

Function

The recording-scheme command creates a recording scheme and displays the recording scheme view.

The undo recording-scheme command deletes a recording scheme.

By default, no recording scheme is configured on the device.

Format

recording-scheme recording-scheme-name

undo recording-scheme recording-scheme-name

Parameters

Parameter

Description

Value

recording-scheme-name

Specifies the name of a recording scheme.

The value is a string of 1 to 32 case-sensitive characters. It cannot contain spaces or the following symbols: / \ : * ? " < > | @ ' %. The value cannot be - or --.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After a recording scheme takes effect, you can view the records such as the executed commands, connection information, and system-level events on the recording server. The records help you locate network faults. Because a recording scheme needs to be associated with an HWTACACS server template, the recording scheme is configured only when HWTACACS authentication or authorization is performed.

Creating a recording template using the recording-scheme command is mandatory for configuration.

Follow-up Procedure

Run the recording-mode hwtacacs command to associate an HWTACACS server template with the recording scheme.

After a recording scheme is created and associated with an HWTACACS server template, perform the following configurations in the AAA view:
  • Run the cmd recording-scheme command to apply a policy in a recording scheme to record the commands executed on the device.
  • Run the outbound recording-scheme command to apply a policy in a recording scheme to record the connection information.
  • Run the system recording-scheme command to apply a policy in a recording scheme to record the system events.

Precautions

If the recording scheme to be configured does not exist, the recording-scheme command creates a recording scheme and displays the recording scheme view. If the recording scheme to be configured already exists, the recording-scheme command displays the recording scheme view.

Before deleting a recording scheme, ensure that the scheme has not been referenced by the cmd recording-scheme or outbound recording-scheme or system recording-scheme command.

Example

# Create a recording scheme scheme0.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] recording-scheme scheme0
[Huawei-aaa-recording-scheme0]
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196741

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next