display dhcp server group
Usage Guidelines
Usage Scenario
This command applies to DHCP relay agents. The display dhcp server group command displays information about all the DHCP server groups of a DHCP relay agent and the number of DHCP servers in the DHCP server groups. If group-name is specified, the display dhcp server group group-name command displays DHCP server addresses and the number of DHCP servers in a specified DHCP server group.
Prerequisites
A DHCP server group has been created on a DHCP relay agent using the dhcp server group command.
Example
# Display the configuration of the DHCP server group myServers.
<Huawei> display dhcp server group myServers
Group-name : myServers
(0) Server-IP : 10.1.1.1
Gateway : 10.10.10.1
Item |
Description |
---|---|
Group-name |
Name of a DHCP server group. To specify the parameter, run the dhcp server group command. |
Gateway |
Gateway address of the DHCP server in the DHCP server group. To specify the parameter, run the gateway (DHCP server group view) command. |