rssi-diff-gap
Function
The rssi-diff-gap command sets the RSSI difference threshold of members in a static load balancing group.
The undo rssi-diff-gap command restores the default RSSI difference threshold of members in a static load balancing group.
By default, the RSSI difference threshold of members in a static load balancing group is 5 dB.
Usage Guidelines
Usage Scenario
To achieve load balancing, an AP may migrate connected STAs to other APs with smaller RSSIs. If the RSSI of the AP with which a STA currently associates minus the RSSI of the target AP is larger than the specified RSSI difference threshold, the STA is denied from being migrated to the target AP; otherwise, the STA can be migrated to the target AP.
Precautions
If STAs have high signal quality deterioration tolerance for the target AP, you can set a larger RSSI difference threshold to achieve better load balancing effect. If STAs have low signal quality deterioration tolerance for the target AP, set a smaller RSSI difference threshold. You are advised to retain the default value.
Previous
