No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
accounting start-fail

accounting start-fail


The accounting start-fail command configures a policy for accounting-start failures.

The undo accounting start-fail command restores the default policy for accounting-start failures.

By default, users cannot go online if accounting-start fails. That is, the offline policy is used.


accounting start-fail { offline | online }

undo accounting start-fail






Rejects users' online requests if accounting-start fails.



Allows users to go online if accounting-start fails.



Accounting scheme view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

If a user goes online after an accounting scheme is applied, the device sends an accounting-start packet to an accounting server. When the network is working properly, the accounting server responds to the accounting-start packet. If a fault occurs on the network, the device may not receive the response packet from the accounting server. As a result, accounting fails. The device provides the following policies for accounting failures:

  • online: To prevent users from being affected by network faults, use the online policy to allow paid users to go online.
  • offline: To stop providing services when accounting fails, use the offline policy to force paid users to go offline.


The command takes effect only when the accounting mode configured using the accounting-mode command is HWTACACS or RADIUS.


# In the accounting scheme scheme1, use the online policy for accounting-start failures.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] accounting-scheme scheme1
[Huawei-aaa-accounting-scheme1] accounting start-fail online
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 256640

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next