No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp enable

dhcp enable


The dhcp enable command enables the DHCP function.

The undo dhcp enable command disables the DHCP function.

By default, the DHCP function is disabled.


dhcp enable

undo dhcp enable




System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Network scale and complexity increase makes network configurations complex. For example, computers frequently change their locations, and IP addresses are insufficient for these computers. The DHCP protocol is developed to address these problems. The dhcp enable command enables the DHCP function on the device.


The dhcp enable command is the prerequisite for configuring DHCP-related functions, including DHCP relay, DHCP snooping, and DHCP server. These functions take effect only after the dhcp enable command is run. After the undo dhcp enable command is run, all DHCP-related configurations of the device are deleted. After DHCP is enabled again using the dhcp enable command, all DHCP-related configurations of the device are restored to the default configurations.


# Enable the DHCP function on the device.

<Huawei> system-view
[Huawei] dhcp enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 247999

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next