No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
decoding uri-cache

decoding uri-cache

Function

The decoding uri-cache enable command enables the URI cache function.

The decoding uri-cache disable command disables the URI cache function.

Format

decoding uri-cache { enable | disable }

Parameters

Parameter Description Value
enable Enables the function. -
disable Disables the function. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

By default, the URI cache function is enabled.

If no threat is detected from the corresponding session traffic after the URI cache function is enabled, the system will not inspect the session traffic with the same URI in a period of time. If all traffic must be inspected, disable the URI cache function.

Example

# Disable the URI cache function.

<Huawei> system-view
[Huawei] decoding uri-cache disable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204367

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next