No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp server bootp automatic

dhcp server bootp automatic

Function

The dhcp server bootp automatic command enables the DHCP server to dynamically allocate IP addresses to BOOTP clients.

The undo dhcp server bootp automatic command disables the DHCP server from dynamically allocating IP addresses to BOOTP clients.

By default, a DHCP server does not dynamically allocate IP addresses to BOOTP clients.

Format

dhcp server bootp automatic

undo dhcp server bootp automatic

Parameters

None

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to DHCP servers. When BOOTP clients need to obtain their IP addresses, DNS server's IP address, and gateway IP address from a DHCP server, you need to run the dhcp server bootp automatic command to enable the DHCP server to dynamically allocate IP addresses to BOOTP clients.

Prerequisites
  • DHCP has been enabled globally using the dhcp enable command in the system view.

  • The DHCP server has been enabled to respond to BOOTP requests by using the dhcp server bootp command, or dhcp server bootp automatic cannot take effect.

Precautions

When the device functions as the DHCP server, the device can allocate IP addresses to BOOTP clients if the BOOTP clients reside on the same network as the DHCP server. You can run the dhcp server bootp automatic command to dynamically allocate IP addresses. You can also run the static-bind command or the dhcp server static-bind command to allocate IP addresses to BOOTP clients in the static binding mode.

Example

# Enable the DHCP server to allocate IP addresses to BOOTP clients.

<Huawei> system-view
[Huawei] dhcp enable
[Huawei] dhcp server bootp
[Huawei] dhcp server bootp automatic
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211791

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next