No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent mib-view

display snmp-agent mib-view


The display snmp-agent mib-view command displays the current MIB view.


display snmp-agent mib-view [ view-name ]


Parameter Description Value
view-name Specifies the view to be displayed. This parameter can be set using the snmp-agent mib-view command. It is a string of 1 to 32 case-sensitive characters without spaces.


All views

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The snmp-agent mib-view command creates or updates a MIB view. To check the default and configured MIB view, you can run the display snmp-agent mib-view command.

By default, the view ViewDefault is adopted.


Before running the display snmp-agent mib-view command, ensure that the SNMP agent has been enabled.


# Display the current MIB view.

<Huawei> display snmp-agent mib-view
   View name:ViewDefault
       MIB subtree:internet
       Subtree mask:
       Storage type: nonVolatile
       View type:included
       View status:active      
Total number is 1  
Table 28-5  Description of the display snmp-agent mib-view command output



View name

View name.

MIB subtree

MIB subtree.

Subtree mask

Subtree mask.

Storage type

Data storage type.
  • volatile: Lines are saved in the volatile storage medium and are lost after the device restarts.
  • nonVolatile: Lines are saved in the nonvolatile storage medium and are restored after the device restarts.
  • permanent: Permanent lines are saved in the nonvolatile storage medium. They can be modified but cannot be deleted.
  • readOnly: Readonly lines are saved in the nonvolatile storage medium. They cannot be modified or deleted.
  • other: other storage types.
At present, only nonVolatile is available.

View type

Type of a view. The options are as follows:
  • included: The view includes the subtree.
  • excluded: The view excludes the subtree.

View status

Indicates the status of the MIB view.

Total number

Total number of views whose information is queried.

Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208239

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next