No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display service-scheme

display service-scheme

Function

The display service-scheme command displays the configuration of service schemes.

Format

display service-scheme [ name name ]

Parameters

Parameter

Description

Value

name name

Specifies the name of a service scheme.

The service scheme must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The display service-scheme command displays the configuration of service schemes.

Before applying a service scheme to a domain, run the display service-scheme command to check whether the service scheme is correct.

Precautions

The display service-scheme command displays the detailed configuration if the command is executed in the service scheme view or the name of a service scheme is specified. Otherwise, this command displays only the summary of service schemes.

Example

# Display information about all service schemes.

<Huawei> display service-scheme
  -------------------------------------------------------------------
  service-scheme-name                    scheme-index
  -------------------------------------------------------------------
  svcscheme1                               0
  svcscheme2                               1
  -------------------------------------------------------------------
  Total of service scheme: 2

# Display the configuration of the service scheme svcscheme1.

<Huawei> display service-scheme name svcscheme1
                                                                            
  service-scheme-name           : svcscheme1
  service-scheme-primary-dns    : 10.2.3.4  
  service-scheme-secondary-dns   : -      
  service-scheme-adminlevel     : 15  
  service-scheme-redirect-acl-id: 3001 
  service-scheme-idlecut-time   : 10                                                                                                
  service-scheme-idlecut-flow   : 20                                                                                                
  service-scheme-idlecut-direct : Inbound and Outbound 
Table 26-20  Description of the display service-scheme command output

Item

Description

service-scheme-name

Name of a service scheme. To create a service scheme, run the service-scheme (AAA view) command.

scheme-index

Index of the service scheme.

service-scheme-primary-dns

Address of the primary DNS server.

service-scheme-secondary-dns

Address of the secondary DNS server.

service-scheme-adminlevel

Level of an administrator. The value is an integer that ranges from 0 to 15. The value 15 indicates that this parameter is invalid. To configure a level of an administrator, run the admin-user privilege level command.

service-scheme-redirect-acl-id

Number of the ACL used for redirection in the service scheme.

service-scheme-idlecut-time

Idle-cut timeout interval, in minutes.

To configure this item, run the idle-cut (service scheme view) command.

service-scheme-idlecut-flow

Traffic threshold for idle-cut, in kbytes.

To configure this item, run the idle-cut (service scheme view) command.

service-scheme-idlecut-direct

Direction in which idle-cut takes effect for traffic. The value can be:
  • Inbound: Idle-cut takes effect for uplink traffic.
  • Outbound: Idle-cut takes effect for downlink traffic.
  • Inbound and Outbound: Idle-cut takes effect for uplink and downlink traffic.

To configure this item, run the idle-cut (service scheme view) command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 201226

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next