No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent trap enable feature-name vrrp

snmp-agent trap enable feature-name vrrp

Function

The snmp-agent trap enable feature-name vrrp command enables the trap function for the VRRP module.

The undo snmp-agent trap enable feature-name vrrp command disables the trap function for the VRRP module.

By default, the trap function is enabled for the VRRP module.

Format

snmp-agent trap enable feature-name vrrp [ trap-name { hwvrrpexttrapnonmaster | vrrptrapauthfailure | vrrptrapmasterdown | vrrptrapnewmaster | vrrpv3newmaster | vrrpv3protoerror } ]

undo snmp-agent trap enable feature-name vrrp [ trap-name { hwvrrpexttrapnonmaster | vrrptrapauthfailure | vrrptrapmasterdown | vrrptrapnewmaster | vrrpv3newmaster | vrrpv3protoerror } ]

Parameters

Parameter Description Value
trap-name Enables the trap function for the specified event. If no event type is specified using the trap-name parameter, the trap function is enabled for all events. -
hwvrrpexttrapnonmaster This trap is generated when the VRRP backup group status changes from Backup to Initialize or from Initialize to Backup. -
vrrptrapauthfailure Enables the vrrptrapauthfailure trap. When the authentication key or authentication type in the received packet conflicts with that on the wireless access point, the wireless access point sends this trap message to the NMS. -
vrrptrapmasterdown Enables the vrrptrapmasterdown trap. When the wireless access point in the VRRP group changes from Master to Backup or Initialize, the wireless access point sends this trap message to the NMS. -
vrrptrapnewmaster Enables the vrrptrapnewmaster trap. When the wireless access point in the VRRP group changes from Backup or Initialize to Master, the wireless access point sends this trap message to the NMS. -
vrrpv3newmaster Enables the trap function when VRRPv3 changes from another state to the Master state. -
vrrpv3protoerror Enables the trap function when a device in a VRRPv3 backup group receives an incorrect VRRP packet. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

You can specify trap-name to enable the trap function for one or more events of the VRRP module.

Example

# Enable the vrrptrapauthfailure trap.

<Huawei> system-view
[Huawei] snmp-agent trap enable feature-name vrrp trap-name vrrptrapauthfailure
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210327

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next