No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
user-protocol-statistic enable

user-protocol-statistic enable


The user-protocol-statistic enable command enables the user protocol statistics collection function.

The undo user-protocol-statistic enable command disables the user protocol statistics collection function.

By default, the user protocol statistics collection function is disabled.


user-protocol-statistic enable

undo user-protocol-statistic enable




SAC profile view

Default Level

2: Configuration level

Usage Guidelines

After going online on the RU, the user starts various applications on the STA to access the network. By analyzing packets sent by users, the central AP collects information about network usage by applications of each user and reports the collected information to the network management system (NMS). The NMS then displays and stores the information, which the administrator can view at any time. To identify user-based applications, run the user-protocol-statistic enable command.

This function takes effect only for STAs who go online after the user-protocol-statistic enable command is successfully executed.


# Enable the user protocol statistics collection function in SAC profile p1.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] sac-profile name p1
[Huawei-wlan-sac-prof-p1] user-protocol-statistic enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 194785

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next