No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The air-scan-profile command creates an air scan profile and displays the air scan profile view.

The undo air-scan-profile command deletes an air scan profile.

By default, the system provides the air scan profile default. You can run the display air-scan-profile command to view configuration of the air scan profile default.


air-scan-profile name profile-name

undo air-scan-profile { name profile-name | all }





name profile-name

Specifies the name of an air scan profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot start or end with double quotation marks (" ").


Deletes all air scan profiles.

The air scan profile default can be modified but cannot be deleted.


WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After an air scan profile is created using the air-scan-profile command and bound to a radio profile, and scanning functions are enabled, such as radio calibration, smart roaming, WLAN location, and WIDS, the AP periodically scans surrounding radio signals and reports the collected information to a server. The information is used for radio calibration, smart roaming, WLAN location, or WIDS data analysis.

Follow-up Procedure

Run the air-scan-profile command to bind the air scan profile to a 2G radio profile or 5G radio profile so that the air scan profile can take effect.


# Create the air scan profile air-scan01.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] air-scan-profile name air-scan01
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 204707

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next