No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-antenna { enable | disable }

smart-antenna { enable | disable }


The smart-antenna { enable | disable } command enables or disables the smart antenna function for an AP.

The undo smart-antenna command restores the smart antenna function of an AP to the default state.

By default, the smart antenna function is enabled for the R251D and R251D-E.


smart-antenna { enable | disable }

undo smart-antenna




2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After the smart antenna function is enabled, an AP can select a proper antenna array based on STAs' locations, improving signal strength and user experience.


  • The R251D and R251D-E support the smart antenna function.


# Enable the smart antenna function for an AP.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] smart-antenna enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209232

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next