No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display igmp-snooping configuration

display igmp-snooping configuration

Function

The display igmp-snooping configuration command displays the IGMP snooping configuration.

Format

display igmp-snooping configuration

Parameters

None.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

This command displays only the IGMP snooping configuration so that you can check whether the IGMP snooping configuration made in the system is proper.

Prerequisites

The IGMP snooping configuration in a VLAN can be displayed as long as IGMP snooping parameters have been configured in the VLAN, no matter whether the VLAN contains interfaces in Up state.

Global IGMP snooping must be enabled using the igmp-snooping enable (system view) command before any IGMP snooping configuration is performed.

Example

# Display the IGMP snooping configuration in all VLANs.

<Huawei> display igmp-snooping configuration
 IGMP Snooping Configuration for VLAN 7
     igmp-snooping enable
     igmp-snooping version 3
     igmp-snooping ssm-mapping enable
     igmp-snooping ssm-policy 2000
     igmp-snooping ssm-mapping 232.1.1.0 255.255.255.0 10.1.2.1
Table 6-113  Description of the display igmp-snooping configuration command output

Item

Description

Global switch

IGMP snooping is enabled globally.

By default, IGMP snooping is disabled globally. You can enable IGMP snooping using the igmp-snooping enable (system view) command.

Enabled VLAN

VLAN in in which IGMP snooping is enabled.

By default, IGMP snooping is disabled in all VLANs. You can enable IGMP snooping in a VLAN using the igmp-snooping enable (VLAN view) command.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207266

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next