Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snmp-agent protocol get-bulk timeout
Function
The snmp-agent protocol get-bulk timeout command sets the timeout threshold for the get-bulk operation.
The undo snmp-agent protocol get-bulk timeout command restores the default timeout threshold for the get-bulk operation.
The default timeout threshold for the get-bulk operation is 2 seconds.
Parameters
| Parameter | Description | Value |
|---|---|---|
| time | Specifies the timeout threshold for the get-bulk operation. | The value is an integer that ranges from 0 to 600, in seconds. The value 0 indicates that the get-bulk operation will never time out. |
Previous
