No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ssh user-information

display ssh user-information


The display ssh user-information command displays the configuration of all SSH users.


display ssh user-information [ username ]


Parameter Description Value
username Displays the SSH user name.

The value is a string of 1 to 64 case-insensitive characters without spaces.


All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays the SSH user name, bound RSA public key name, and service type.


# Display the configuration of all SSH users.

<Huawei> display ssh user-information
 Username         Auth-type          User-public-key-name
 a                password           null
Table 2-20  Description of the display ssh user-information command output




SSH user name.


Authentication mode for an SSH user. The options are as follows:
  • password
  • rsa
  • password-rsa (password and RSA)
  • all (password or RSA)

Run the ssh user authentication-type command to set this item.


Peer RSA public key assigned to an SSH user.

Run the rsa peer-public-key command to set this item.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208273

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next