No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-server hw-ap-info-format include-ap-ip

radius-server hw-ap-info-format include-ap-ip


The radius-server hw-ap-info-format include-ap-ip command configures the AP's IP address carried in Huawei extended attribute HW-AP-Information.

The undo radius-server hw-ap-info-format command restores the default setting.

By default, Huawei extended attribute HW-AP-Information does not carry AP's IP address.


radius-server hw-ap-info-format include-ap-ip

undo radius-server hw-ap-info-format




RADIUS server template view

Default Level

3: Management level

Usage Guidelines

RADIUS is a fully extensible protocol. Device vendors can expand the No. 26 attribute defined in the protocol to implement functions not supported by standard RADIUS attributes. Huawei defines the No. 141 sub-attribute (HW-AP-Information) in the No. 26 attribute to indicate AP information, including the MAC and IP addresses of an AP. The HW-AP-Information attribute is carried in the authentication or accounting request packet send by a device, so that the RADIUS server can use the AP's MAC and IP addresses as the filter criterion to select a policy template to be delivered.

When an AP's IP address is carried in the HW-AP-Information attribute, the encapsulation format of the attribute is AP-MAC AP-IP. For example, when the MAC address of an AP is 0000-1382-4569 and the AP uses an IPv4 address ( to go online, the encapsulation format of the HW-AP-Information attribute is 0000-1382-4569; when the AP uses an IPv6 address (fc00::2) to go online, the encapsulation format of the HW-AP-Information attribute is 0000-1382-4569 fc00::2.


#Configure the AP's IP address in Huawei extended attribute HW-AP-Information.

<Huawei> system-view
[Huawei] radius-server template huawei
[Huawei-radius-huawei] radius-server hw-ap-info-format include-ap-ip
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 249547

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next