No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs-server source-ip (system view)

hwtacacs-server source-ip (system view)

Function

The hwtacacs-server source-ip command configures the source IP address for communication between the device and HWTACACS server.

The undo hwtacacs-server source-ip command cancels the configuration.

By default, the device uses the IP address of the actual outbound interface as the source IP address encapsulated in HWTACACS packets.

Format

hwtacacs-server source-ip ip-address

undo hwtacacs-server source-ip

Parameters

Parameter Description Value
ip-address Specifies the source IP address for communication between the device and HWTACACS server. The value is in dotted decimal notation.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

To set the source IP address for all HWTACACS packets sent by the device, run the hwtacacs-server source-ip command. Then the HWTACACS server uses only one IP address to communicate with the device.

If no source IP address is configured in an HWTACACS server template, the HWTACACS source IP address configured in the system view is used.

The hwtacacs-server source-ip command running in the system view takes effect on all HWTACACS server templates. If the source IP address is configured in both the HWTACACS server template view and system view, the configuration in the HWTACACS server template view has a higher priority.

Example

# Set the source IP address for communication between the device and HWTACACS server to 10.1.1.1.

<Huawei> system-view
[Huawei] hwtacacs-server source-ip 10.1.1.1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 206110

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next