No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ntp-service authentication enable

ntp-service authentication enable


The ntp-service authentication enable command enables identity authentication for NTP.

The undo ntp-service authentication enable command disables the identity authentication.

By default, identity authentication is disabled.


ntp-service authentication enable

undo ntp-service authentication enable




System view

Default Level

2: Configuration level

Usage Guidelines

On networks requiring high security, authentication must be enabled for NTP. The NTP client authenticates NTP servers using a password and synchronizes time with only the authenticated server. This improves network security.


# Enable identity authentication for NTP.

<Huawei> system-view
[Huawei] ntp-service authentication enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207826

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next