No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
calibrate auto-channel-select disable

calibrate auto-channel-select disable

Function

The calibrate auto-channel-select disable command disables automatic channel selection.

The undo calibrate auto-channel-select disable command enables automatic channel selection.

By default, automatic channel selection is enabled.

Format

calibrate auto-channel-select disable

undo calibrate auto-channel-select disable

Parameters

None

Views

Radio interface view

Default Level

2: Configuration level

Usage Guidelines

Two channel selection modes are available:
  • Automatic mode (enabling automatic channel selection): An AP automatically selects a proper channel based on the WLAN radio environment, removing the need to specify channels manually.
  • Fixed mode (disabling automatic channel selection): Channels must be manually specified.

The automatic mode (automatic channel selection) is recommended because you do not need to specify a channel for each radio. The fixed mode provides users with an alternative way when they want to specify channels by themselves or to avoid frequent channel adjustment (this may cause intermittent service interruption).

If an AP needs radio calibration, automatic channel selection must be enabled.

When automatic channel selection is enabled, the manually configured channels do not take effect to ensure that the radio works in the optimal channel environment.

Example

# Disable automatic channel selection.
<Huawei> system-view
[Huawei] interface Wlan-Radio 0/0/0
[Huawei-Wlan-Radio0/0/0] calibrate auto-channel-select disable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205294

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next