No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ips signature-action

ips signature-action

Function

The ips signature-action command changes the action of a single predefined signature or the actions of all predefined signatures.

The undo ips signature-action command restores the default action of a single signature or the default actions of all signatures, namely, the actions defined in the intrusion prevention signature database.

Format

ips signature-action alert

ips signature-action signature-id signature-id { allow | alert | block }

undo ips signature-action [ signature-id signature-id ]

Parameters

Parameter Description Value
signature-id signature-id Specifies the ID of a predefined signature.

The value is an integer ranging from 1025 to 16777215.

alert Indicates that the action of a predefined signature is alert. -
allow Indicates that the action of a predefined signature is allow. -
block Indicates that the action of a predefined signature is block. -

Views

System view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Each predefined signature has a default action, namely, allow, alert, or block. To change the default action of a single predefined signature or the default actions of all predefined signatures, run the ips signature-action command.

Precautions

The global configuration of the command takes effect for each profile.

You can run the ips signature-action alert command to change the actions of all predefined signatures to alert, and not allow or block. To change the actions of all predefined signatures to allow, run the ips signature-state disabled command.

The priorities of predefined signatures' actions are single action, global action, and default action in a descending order.

The actions of exception signatures defined in a profile take precedence over the actions configured using the ips signature-action command.

Example

# change the action of predefined signature 284860 to block.

<Huawei> system-view
[Huawei] ips signature-action signature-id 284860 block

# Change the actions of all predefined signatures to alert.

<Huawei> system-view
[Huawei] ips signature-action alert
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196748

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next