No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids device detect enable

wids device detect enable

Function

The wids device detect enable command enables device detection on an AP radio.

The undo wids device detect enable command disables device detection on an AP radio.

By default, device detection is disabled on an AP radio.

Format

wids device detect enable

undo wids device detect enable

Parameters

None

Views

Radio interface view

Default Level

2: Configuration level

Usage Guidelines

Application Scenario

After the wireless device detection function is enabled, the monitoring AP detects information about wireless devices in its coverage range. The AP determines whether unauthorized devices exist on the WLAN.

Example

# Enable device detection on radio 0.
<Huawei> system-view
[Huawei] interface wlan-radio 0/0/0
[Huawei-wlan-Radio0/0/0] wids device detect enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211816

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next