No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe power-off time-range (AP wired port link profile view)

poe power-off time-range (AP wired port link profile view)

Function

The poe power-off time-range command makes a configured PoE power-off time range effective on an interface.

The undo poe power-off time-range command makes a configured PoE power-off time range ineffective on an interface.

Format

poe power-off time-range time-range-name

undo poe power-off time-range

Parameters

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run the poe power-off time-range command to configure a PoE power-off time range on an interface. If the current time is within the specified time range, the PD connected to the interface cannot be powered on.

To cancel a configured PoE power-off time range on an interface, run the undo poe power-off time-range command. The time range does not take effect on the PD connected to the interface; however, the configuration of the time range is still saved.

Pre-configuration Tasks

Before running the poe power-off time-range command, you must ensure a PoE power-off time range has been configured through running the time-range command in the system view.

Precautions

This command takes effect only on the AD9430DN-24 and AD9431DN-24X.

Example

# Set a PoE power-off time range from 10:00 am to 11:00 am.
<Huawei> system-view
[Huawei] time-range PoE 10:00 to 11:00 daily
[Huawei] wlan 
[Huawei-wlan-view] port-link-profile name port-link1
[Huawei-wlan-port-link-prof-port-link1] poe power-off time-range PoE
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208075

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next