No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
aaa-quiet administrator except-list

aaa-quiet administrator except-list

Function

The aaa-quiet administrator except-list command configures a user to access the network using a specified IP address when the user account is locked.

The undo aaa-quiet administrator except-list command restores the default setting.

By default, a user cannot access the network when the account is locked.

Format

aaa-quiet administrator except-list { ipv4-address | ipv6-address } &<1-32>

undo aaa-quiet administrator except-list

Parameters

Parameter

Description

Value

ipv4-address

Specifies an IPv4 address. A user can access the network using this IPv4 address when the user account is locked.

The value must be a valid unicast address in dotted decimal notation.

ipv6-address

Specifies an IPv6 address. A user can access the network using this IPv6 address when the user account is locked.

The total length of the value is 128 bits, which are divided into eight groups. Each group contains four hexadecimal digits. The value is in the format of X:X:X:X:X:X:X:X.

Views

AAA view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

In AAA view, after the function of locking the account of an AAA local authentication user or AAA remote authentication user is configured using the local-aaa-user wrong-password or remote-aaa-user authen-fail command, if a user consecutively enters an incorrect password and the number of times that the user enters an incorrect password reaches the allowed maximum number of times, the user account is locked and the user cannot access the network when the account is locked. To facilitate maintenance and management, you can run the aaa-quiet administrator except-list command to configure the user to access the network using a specified IP address when the user account is locked.

Precautions

  • This function takes effect only for the administrators.
  • A maximum of 64 IPv4 and IPv6 addresses can be configured.

Example

# Configure a user to access the network using the specified IP address 10.1.1.1 when the user account is locked.

<Huawei> system-view
[Huawei] aaa
[Huawei-aaa] aaa-quiet administrator except-list 10.1.1.1
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211356

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next