No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display station neighbor

display station neighbor


The display station neighbor command displays the neighbor list of a specified STA.


display station neighbor sta-mac mac-address


Parameter Description Value
sta-mac mac-address

Specifies the MAC address of a STA.

The MAC address must exist.


All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the neighbor list of the STA with a specified MAC address.


# Display the neighbor list of the STA with a specified MAC address.

<Huawei> display station neighbor sta-mac d022-be5e-021f
Device MAC         Device ID   Device Name        Radio ID       Probe info(RSSI/HH:MM:SS)   11k info[RCPI/RSNI/HH:MM:SS]
 1047-80ab-c9a0    5           AP5                1              -48/16:28:24                205/45/16:28:24
Total neighbors: 1, total records: 1 

System Response

Table 19-9  Description of the display station neighbor command output



Device MAC MAC address of a neighboring device.
Device ID ID of a neighboring device.
Device Name Name of a neighboring device.
Radio ID Radio ID of a neighboring device.
Probe info(RSSI/HH :MM:SS) Probe information about the STA, including the RSSI and timestamp.
11k info[RCPI/RSNI/HH:MM:SS] 802.11k information about the STA, including the Received Channel Power Indicator, Received Signal-to-Noise Indication, and timestamp.
If the STA does not support 802.11k, this parameter is displayed as "-".
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210404

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next