No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
wids-whitelist-profile (WLAN view)

wids-whitelist-profile (WLAN view)


The wids-whitelist-profile command creates a WIDS whitelist profile and displays the WIDS whitelist profile view.

The undo wids-whitelist-profile command deletes a WIDS whitelist profile.

By default, no WIDS whitelist profile exists in the system.


wids-whitelist-profile name profile-name

undo wids-whitelist-profile { name profile-name | all }





name profile-name

Specifies the name of a WIDS whitelist profile.

The value is a string of 1 to 35 case-insensitive characters. It does not contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").

all Deletes all WIDS whitelist profiles. -


WLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After WIDS/WIPS is enabled, rogue APs can be detected and countered. However, there may be APs of other vendors or on other networks working in the existing signal coverage areas. If these APs are countered, their services will be affected. To prevent this situation, configure an authorized AP list, including an authorized MAC address list, OUI list, and SSID list. If an unauthorized AP is detected but matches the authorized AP list, the AP is considered an authorized AP and will not be countered. After you create a WIDS whitelist profile using the wids-whitelist-profile command, run the permit-ap command to configure an authorized AP list.

Follow-up Procedure

Run the wids-whitelist-profile (WIDS profile view) command to bind the WIDS whitelist profile to a WIDS profile so that the WIDS whitelist profile can take effect.


# Create the WIDS whitelist profile office.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] wids-whitelist-profile name office
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 256727

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next