No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display flow-suppression interface

display flow-suppression interface

Function

The display flow-suppression interface command displays the traffic suppression configuration on an interface.

Format

display flow-suppression interface interface-type interface-number

Parameters

Parameter

Description

Value

interface interface-type interface-number

Specifies the type and number of an interface.
  • interface-type specifies the type of the interface.
  • interface-number specifies the interface number.
The interface type can be GE.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display the traffic suppression configuration on GigabitEthernet 0/0/1.

<Huawei> display flow-suppression interface gigabitethernet 0/0/1
 storm type         rate mode   set rate value                                  
------------------------------------------------------------------------------- 
 unknown-unicast    pps         pps: 1260(packet/s)                            
 multicast          pps         pps: 2520(packet/s)                            
 broadcast          pps         pps: 1260(packet/s)                            
------------------------------------------------------------------------------- 
Table 26-81  Description of the display flow-suppression interface command output

Item

Description

storm type

Traffic type. Broadcast traffic, multicast traffic, and unknown unicast traffic can be suppressed.

rate mode

Type of the rate limit.
  • pps: packet mode

set rate value

Configured rate limit.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209317

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next