No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe force-power (AP wired port link profile view)

poe force-power (AP wired port link profile view)

Function

The poe force-power command enables forcible PoE power supply on an interface.

The undo poe force-power command disables forcible PoE power supply on an interface.

Format

poe force-power

undo poe force-power

Parameters

None

Views

AP wired port link profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After this function is configured, an interface forcibly powers on the connected PD even if the PSE cannot identify the PD. Before powering on the interface, ensure that the system power is sufficient.

Precautions

If a PoE interface connects to a non-PoE device, do not use this command.

This command takes effect only on the R250D-E and R251D-E..

Example

# Enable forcible PoE power supply on a central AP's interface.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] port-link-profile name port-link1
[Huawei-wlan-port-link-prof-port-link1] poe force-power
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211766

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next