No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Using the management-vlan command, you can configure a VLAN as a management VLAN.

Using the undo management-vlan command, you can cancel the configuration.

By default, no VLAN is configured as a management VLAN.



undo management-vlan




VLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To use a network management system to manage multiple devices, create a VLANIF interface on each device and configure a management IP address for the VLANIF interface. You can then log in to a device and manage it using its management IP address. If a user-side interface is added to the VLAN, users connected to the interface can also log in to the device. This brings security risks to the device.

After a VLAN is configured as a management VLAN, no access interface can be added to the VLAN. An access interface is connected to users. The management VLAN forbids users connected to access interfaces to log in to the device, improving device performance.

Follow-up Procedure

Create a VLANIF interface corresponding to the VLAN and configure a management IP address on the VLANIF interface.


VLAN 1 cannot be configured as an mVLAN.

You can run the display vlan command to view the management VLAN configuration. In the command output, the VLAN marked with a * is the management VLAN.

After a VLAN is configured as a management VLAN, only trunk and hybrid interfaces can be added to the VLAN.


# Configure VLAN 100 as a management VLAN.

<Huawei> system-view
[Huawei] vlan 100
[Huawei-vlan100] management-vlan
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207390

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next