No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcp server sip-server

dhcp server sip-server


The dhcp server sip-server command configures the SIP server IP address assigned to a DHCP client on an interface address pool.

The undo dhcp server sip-server command deletes the configured SIP server IP address assigned to a DHCP client on an interface address pool.

By default, the SIP server IP address assigned to a DHCP client on an interface address pool is not configured.


dhcp server sip-server { ip-address ip-address &<1-2> | list domain-name &<1-2> }

undo dhcp server sip-server


Parameter Description Value
ip-address ip-address

Specifies an IP address for the SIP server.

The value is in dotted decimal notation.
list domain-name

Specifies the domain name of the SIP server.

The value is a string of 1 to 63 characters.


VLANIF interface view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

This command applies to the DHCP server. To enable DHCP clients to normally access the Internet, the DHCP server needs to specify the SIP server IP address in the interface address pool when assigning IP addresses to the clients.


  • A maximum of two SIP server addresses can be configured in each address pool. The first assigned address functions as the primary address, and the other address functions as a secondary address.
  • Before specifying the IP address or name for a SIP server, ensure that the SIP server exists.
  • If you run this command repeatedly, the latest configuration overrides the previous ones.


# Specify as the IP address of the SIP server when addresses in the interface VLANIF100 address pool are assigned to clients.

<Huawei> system-view
[Huawei] dhcp enable
[Huawei] interface vlanif 100
[Huawei-Vlanif100] ip address 24 
[Huawei-Vlanif100] dhcp select interface
[Huawei-Vlanif100] dhcp server sip-server ip-address
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195230

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next