No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
location

location

Function

The location command configures the installation position of an AP.

The undo location command deletes the installation position of an AP.

By default, an AP's installation position is not configured.

Format

location location-value

undo location

Parameters

Parameter

Description

Value

location-value

Specifies the installation position of an AP.

The value is a string of 1 to 63 characters.

Views

AP view (for a central AP), WLAN view (for a common AP)

Default Level

2: Configuration level

Usage Guidelines

You can run the location command to configure the installation position of an AP.

Example

# Configure the installation position of an RU to B2-5F-01 on a central AP.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] ap-id 1
[Huawei-wlan-ap-1] location B2-5F-01
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 205330

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next