No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display interface brief

display interface brief

Function

The display interface brief command displays brief information about the status and configuration of interfaces.

Format

display interface brief [ main ]

Parameters

Parameter

Description

Value

main

Displays brief information about an Ethernet main interface.

-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

The display interface brief command displays brief information about interfaces, including the physical status, link layer protocol status, inbound and outbound bandwidth usage within a certain period, and numbers of sent and received error packets. This information helps locate faults on interfaces.

Precautions

To clear statistics on an interface, run the reset counters interface command.

Example

# Display brief information about the status and configuration of interfaces.

<Huawei> display interface brief
PHY: Physical                                                                   
*down: administratively down                                                    
(l): loopback                                                                   
(s): spoofing                                                                   
(e): ETHOAM down                                                                
(d): Dampening Suppressed                                                       
InUti/OutUti: input utility/output utility                                      
Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors   
GigabitEthernet0/0/1        up    up       0.01%  0.01%          0          0   
LoopBack0                   up    up(s)       0%     0%          0          0   
LoopBack1                   up    up(s)       0%     0%          0          0   
NULL0                       up    up(s)       0%     0%          0          0   
Vlanif1                     up    down        --     --          0          0   
Vlanif100                   down  down        --     --          0          0   
Vlanif2001                  up    up          --     --          0          0   
Wlan-Bss0                   up    up          --     --          0          0   
Wlan-Radio0/0/0             up    up          --     --          0          0   
Wlan-Radio0/0/1             up    up          --     --          0          0   
Table 5-3  Description of the display interface brief command output

Item

Description

Interface

Type and number of an interface.

PHY

Physical status of an interface:
  • up: indicates that the interface is working properly.
  • down: indicates that the physical layer of the interface fails.
  • *down: Administratively Down, indicating that the administrator has run the shutdown command on the interface.
  • (l): indicates that the loopback function is enabled on the interface.

Protocol

Link layer protocol status of the interface:
  • up: indicates that the interface is working properly.
  • down: indicates that the link layer protocol of the interface fails.
  • (l): indicates that the loopback function is enabled on the interface.
  • (s): indicates that the spoofing function is enabled on the interface.
  • (e): indicates that the link layer of the interface is in EFM Down state.
  • (d): indicates that the protocol module of the interface is suppressed.
  • --: indicates that the link layer protocol status is not obtained.

InUti

Average inbound bandwidth usage of an interface within the last 300 seconds.

Average inbound bandwidth usage within the last 300 seconds = Average inbound traffic rate within the last 300 seconds/Interface bandwidth

When the average bandwidth usage is smaller than 0.01% and greater than 0, the value 0.01% is displayed. When the interface bandwidth becomes lower, the bandwidth usage may be displayed as 100% because the traffic volume is not adjusted in time. "--" indicates that an interface does not support the display of bandwidth usage.

OutUti

Average outbound bandwidth usage within the last 300 seconds.

Average outbound bandwidth usage within the last 300 seconds = Average outbound traffic rate within the last 300 seconds/Interface bandwidth

When the average bandwidth usage is smaller than 0.01% and greater than 0, the value 0.01% is displayed. When the interface bandwidth becomes lower, the bandwidth usage may be displayed as 100% because the traffic volume is not adjusted in time. "--" indicates that an interface does not support the display of bandwidth usage.

inErrors

Number of error packets received by an interface. The value becomes 0 when you run the reset counters interface command in the user view or when the number of received packets reaches the maximum value 0xFFFFFFFF.

outErrors

Number of error packets sent by an interface. The value becomes 0 when you run the reset counters interface command in the user view or when the number of sent packets reaches the maximum value 0xFFFFFFFF.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209190

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next