No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
terminal trapping

terminal trapping


The terminal trapping command enables trap display on the user terminal.

The undo terminal trapping command disables trap display on the user terminal.

By default, trap display is enabled on the user terminal.


terminal trapping

undo terminal trapping




User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To view traps on a terminal, run the terminal trapping command to enable trap display on the user terminal.


The terminal monitor command has been executed to enable display of logs, traps, and debugging message output on the user terminal.


# Disable trap display on the user terminal.

<Huawei> undo terminal trapping
Info: Current terminal trapping is off. 
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 208003

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next