No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
private server

private server

Function

The private server command configures the destination IP address and port number for the RU to report terminal location data.

The undo private server command restores the default destination IP address and port number for the RU to report terminal location data.

By default, no destination IP address or port number is configured for the RU to report terminal location data.

Format

private server ip-address ip-address port port-num via-ac ac-port ac-port-num

private server domain domain port port-num

undo private server

Parameters

Parameter Description Value
ip-address ip-address

Specifies the server IPv4 address to which the RU reports terminal location data.

The value is in dotted decimal notation.

domain domain

Specifies the domain name to which RUs report STA location data.

The value is a string of 1 to 255 characters.
port port-num

Specifies the destination port number used by the RU to report location data.

The value is an integer that ranges from 1 to 65535.
via-ac

Indicates that STA location data is reported to the location server through a central AP.

-
ac-port ac-port-num

Specifies the destination port number on the central AP to which RUs report STA location data.

The value is an integer that ranges from 5000 to 65535.

Views

Location profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After scanning channels, the RU reports the collected location information to the location server for analysis. You can run this command to configure the destination IP address and port number for the RU to report terminal location data.

Precautions

You cannot configure a port number that has been occupied by other services; otherwise, the port configuration fails.

Example

# Configure the RU to directly report terminal location data to the location server, set the server IP address and port number to 192.168.1.2 and 32180, respectively, and set the central AP port number to 33100.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] location-profile name huawei
[Huawei-wlan-location-prof-huawei] private server ip-address 192.168.1.2 port 32180 via-ac ac-port 33100
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211586

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next