No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radius-server user-name domain-included

radius-server user-name domain-included

Function

The radius-server user-name domain-included command configures the device to encapsulate the domain name in the user name in RADIUS packets to be sent to a RADIUS server.

The radius-server user-name original command configures the device not to modify the user name entered by the user in the packets sent to the RADIUS server.

The undo radius-server user-name domain-included command configures the device not to encapsulate the domain name in the user name when sending RADIUS packets to a RADIUS server.

The undo radius-server user-name domain-included except-eap command configures the device not to encapsulate the domain name in the user name when sending packets to a RADIUS server (applicable to other authentication modes except EAP authentication).

By default, the device does not modify the user name entered by the user in the packets sent to the RADIUS server.

Format

radius-server user-name domain-included

radius-server user-name original

undo radius-server user-name domain-included

undo radius-server user-name domain-included except-eap

Parameters

None

Views

RADIUS server template view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

The format of a user name is user name@domain name. In the user name, @ is the domain name delimiter. The domain name delimiter can also be any of the following symbols: \ / : < > | ' %.

If the RADIUS server does not accept the user name with the domain name, run the undo radius-server user-name domain-included command to delete the domain name from the user name.

Precautions

If the user names in the RADIUS packets sent from the device to RADIUS server contain domain names, ensure that the total length of a user name (user name + domain name delimiter + domain name) is not longer than 253 characters; otherwise, the user name cannot be contained in RADIUS packets. As a result, authentication will fail.

Example

# Configure the device not to encapsulate the domain name in the user name when sending RADIUS packets to a RADIUS server.

<Huawei> system-view
[Huawei] radius-server template template1
[Huawei-radius-template1] undo radius-server user-name domain-included
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212788

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next