No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dynamic-blacklist enable

dynamic-blacklist enable

Function

The dynamic-blacklist enable command enables the dynamic blacklist function.

The undo dynamic-blacklist enable command disables the dynamic blacklist function.

By default, the dynamic blacklist function is disabled.

Format

dynamic-blacklist enable

undo dynamic-blacklist enable

Parameters

None

Views

WIDS view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Attack detection is enabled to detect flood attacks, weak IV attacks, spoofing attacks, and brute force key cracking attacks. When detecting attacks initiated by a device, an AP reports an alarm. In addition, you can run the dynamic-blacklist enable command to enable the dynamic blacklist function on the AP for handling flood attacks and brute force key cracking attacks. The AP then automatically adds the attacking device to a dynamic blacklist and discard packets sent from the attacking device till the dynamic blacklist ages out.

An AP can use the dynamic blacklist to filter out the blacklisted wireless devices to avoid malicious attacks.

Follow-up Procedure

Run the dynamic-blacklist aging-time command to set an aging time for the dynamic blacklist.

Example

# Enable the dynamic blacklist function.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] wids
[Huawei-wlan-wids] dynamic-blacklist enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 198466

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next