No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
telnet server enable

telnet server enable


The telnet server enable command starts a Telnet server.

The undo telnet server enable command stops a Telnet server.

By default, the Telnet server is disabled.


telnet server enable

undo telnet server enable




System view

Default Level

3: Management level

Usage Guidelines

You can run this command to enable and disable the Telnet server. A Telnet server can be connected only when it starts.

When the undo telnet server enable command is executed to disable the Telnet server, an online Telnet user goes offline because the Telnet service is disabled.

When a Telnet server stops, you can log in to the device only through the console port or SSH.

The Telnet protocol poses a security risk, and therefore the STelnet V2 mode is recommended.


# Start a Telnet server.

<Huawei> system-view
[Huawei] telnet server enable
Warning: Telnet is not a secure protocol, and it is recommended to use Stelnet. 

# Stop a Telnet server.

<Huawei> system-view
[Huawei] undo telnet server enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207282

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next