No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
member (static load balancing group view)

member (static load balancing group view)


The member command adds an RU radio to a static load balancing group.

The undo member command deletes an RU radio from a load balancing group.

By default, no RU radio is added to a static load balancing group.


member { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }&<1-8>

undo member { { ap-name ap-name | ap-id ap-id } [ radio radio-id ] }&<1-8>





ap-name ap-name

Specifies the name of an AP. The AP name and radio ID identify a radio.

The AP name must exist.
ap-id ap-id

Specifies the ID of an AP. The AP ID and radio ID identify a radio.

The AP ID must exist.

radio radio-id

Specifies a radio ID. The radio ID and AP name identify a radio.

The value can be 0 or 1.


Static load balancing group view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can use this command to add an RU radio to or delete an RU radio from a static load balancing group. When a STA requests to connect to an RU radio in a static load balancing group, the central AP compares the load of the radio and other working radios in the load balancing group and determines whether to allow the STA to connect to the radio according to a load balancing algorithm.


  • If dual-band RUs are used, traffic is load balanced among RUs working on the same frequency band.
  • Each load balancing group supports a maximum of 16 RU radios.
  • A radio configured with channel 184, 188, 192, or 196 on the 4.9 GHz frequency band cannot be used for load balancing.


# Add radio 0 of RU office to the static load balancing group coco.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] sta-load-balance static-group name coco
[Huawei-wlan-sta-lb-static-coco] member ap-name office radio 0
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 209231

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next