No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
radio

radio

Function

The radio command displays the radio view.

Format

radio radio-id

Parameters

Parameter

Description

Value

radio-id

Specifies the radio ID.

The radio ID must exist.

Views

AP group view, AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The radio configuration in the AP group view or AP view takes effect on all radios at the same time. To perform configuration only on radio 0 or radio 1, enter the view of the corresponding radio to configure the radio parameters.

Precautions

After running the radio radio-id command in the AP group view to enter the radio view, you can perform configurations on all specified radios in the AP group; after running the radio radio-id command in the AP view to enter the radio view, you can perform configurations on the specified AP radio.

Example

# Display the view of radio 0 on the RU with the ID 1

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] ap-id 1
[Huawei-wlan-ap-1] radio 0
[Huawei-wlan-radio-0/0]
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 195890

Downloads: 118

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next