No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
interference adjacent-channel threshold

interference adjacent-channel threshold

Function

The interference adjacent-channel threshold command configures the alarm threshold for adjacent-channel interference.

The undo interference adjacent-channel threshold command restores the default alarm threshold for adjacent-channel interference.

By default, the alarm threshold for adjacent-channel interference is 50%.

Format

interference adjacent-channel threshold threshold-value

undo interference adjacent-channel threshold

Parameters

Parameter

Description

Value

threshold-value

Specifies the alarm threshold, which is the percentage of the adjacent-channel interference power against the maximum power.

The value is an integer that ranges from 1 to 100, in percentage.

Views

2G radio profile view, 5G radio profile view

Default Level

2: Configuration level

Usage Guidelines

Two APs with different center frequencies have overlapping areas, resulting in adjacent-channel interference. When APs are placed too close to each other or have strong signals, more noise is produced, degrading network performance.

After the interference detect-enable command is executed to enable interference detection, an AP can detect adjacent-channel interference. When the AP detects that adjacent-channel interference exceeds the alarm threshold configured using the interference adjacent-channel threshold command, an alarm is generated.

Example

# Set the alarm threshold for adjacent-channel interference to 52%.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] radio-2g-profile name default
[Huawei-wlan-radio-2g-prof-default] interference detect-enable
[Huawei-wlan-radio-2g-prof-default] interference adjacent-channel threshold 52
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210640

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next