No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sniffer enable

sniffer enable

Function

The sniffer enable command enables and configures the working mode of an AP's built-in Bluetooth module.

The undo sniffer enable command disables the configured working mode of an AP's built-in Bluetooth module.

By default, the Bluetooth function of an AP's built-in Bluetooth module is disabled.

Only cloud APs support this command.

Format

sniffer enable { ibeacon-mode | tag-mode | transparent-mode }

undo sniffer enable

Parameters

Parameter

Description

Value

ibeacon-mode

Enables the Bluetooth monitoring function of an AP's built-in Bluetooth module.

-

tag-mode

Enables the Bluetooth tag location function of an AP's built-in Bluetooth module.

-

transparent-mode

Enables the Bluetooth data transparent transmission function of an AP's built-in Bluetooth module.

-

Views

BLE profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After enabling the Bluetooth monitoring or Bluetooth tag location function, the built-in Bluetooth module of an AP will scan and obtain information about surrounding BLE devices or Bluetooth tags, and reports the obtained information such as MAC addresses, RSSIs, BLE broadcast frame contents, and battery power.

After the Bluetooth monitoring function is enabled, an AP obtains battery power of surrounding Bluetooth devices at WLAN service off-peak time, for example, 2:00 am of the system time. Precisely configure the system time of an AC to ensure that WLAN services are not affected when the AC obtains battery power of Bluetooth devices.

After the Bluetooth data transparent transmission function is enabled, the built-in Bluetooth module of an AP scans surrounding Bluetooth clients, and reports information about the scanned Bluetooth clients, such as packet data, MAC addresses, and RSSIs.

The Bluetooth broadcast and Bluetooth monitoring functions can be enabled simultaneously for an AP's built-in Bluetooth module. When the two functions are enabled simultaneously, the AP's built-in Bluetooth module is also monitored.

After you run the undo sniffer enable command to disable the BLE monitoring or Bluetooth tag location function, the AC will trigger an alarm indicating that BLE devices or Bluetooth tags are offline.

Precautions

Example

# Enable the Bluetooth monitoring function.

<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] ble-profile name huawei
[Huawei-wlan-ble-prof-huawei] sniffer enable ibeacon-mode
Warning: Modifying the monitoring mode may cause BLE devices in the original monitoring mode to go offline and age.
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 212523

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next