No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display event information

display event information


The display event information command displays event configurations.


display event information [ name event-name ]


Parameter Description Value
name event-name Displays the configuration of a specified event. If this parameter is not set, configurations of all events are displayed. The value is of enumeration type and varies according to the registered device type.


All views

Default Level

1: Monitoring level

Usage Guidelines

To view event configurations on the device, run the display event information command.


# Display registration information about the hwICLogfileNumberUpper event.

<Huawei> display event information name hwICLogfileNumberUpper 
  EventName: hwICLogfileNumberUpper                                             
  EventType: Critical Event                                                     
  EventLevel: NA                                                                
  Suppress Period: 10s                                                          
  Match VB Name: hwICLogFileNumber                                              
Table 4-19  Description of the display event information command output




Event name.


Event type.


Event level.

Suppress Period

Event report delay period.

You can run the suppression event-name command to set this parameter.

Match VB Name

Matching content of repeated events.

Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 254946

Downloads: 144

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next