No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display portal local-server connect

display portal local-server connect

Function

The display portal local-server connect command displays the connection status of users to be authenticated on a built-in Portal server.

Format

display portal local-server connect [ user-ip ip-address ]

Parameters

Parameter

Description

Value

user-ip ip-address

Displays the connection entry of a user with a specified IP address on a built-in Portal server.

The connection entries of all users on the built-in Portal server are displayed if this parameter is not specified.

The value of ip-address is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display portal local-server connect command to check the authentication mode and status of users to be authenticated on a built-in Portal server.

Example

# Display the connection status of the user with the IP address 10.1.1.10 on a built-in Portal server.

<Huawei> display portal local-server connect user-ip 10.1.1.10
-----------------------------------------------------------------------------------------
 CID  IP Address   AuthMode  State    Session-timeout(hours)  Remaining-wechat-time(secs)
-----------------------------------------------------------------------------------------
 1    10.1.1.10    CHAP      ONLINE   8                       -
------------------------------------------------------------------------------------------
Table 26-54  Description of the display portal local-server connect command output

Item

Description

CID

User table index.

IP Address

IP address of a user.

AuthMode

Authentication mode:
  • CHAP: The built-in Portal server uses CHAP to authenticate the user.
  • PAP: The built-in Portal server uses PAP to authenticate the user.
  • -: This parameter is not supported by the device in the WeChat authentication scenario.

To set the authentication method, run the portal local-server authentication-method command.

State

User status:
  • WAIT_CHALLENGE: waiting for the challenge
  • WAIT_AUTHACK: waiting for the authentication response
  • ONLINE: online
  • WAIT_LOGOUTACK: waiting for logout

Session-timeout(hours)

The session timeout interval.

To set the session timeout interval, run the portal local-server timer session-timeout.

Remaining-wechat-time(secs)

The remaining time before the pre-connection state ends.

To set the pre-authentication period, run the portal local-server timer pre-auth time (Central AP) command.

This parameter is supported only by the central AP.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207137

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next