No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
private mu-enable

private mu-enable

Function

The private mu-enable command enables terminal location of APs.

The undo private mu-enable command disables terminal location of APs.

By default, terminal location of APs is disabled.

Format

private mu-enable

undo private mu-enable

Parameters

None

Views

Location profile view

Default Level

2: Configuration level

Usage Guidelines

You can run the private mu-enable command to enable terminal location of APs.

Example

# Enable terminal location of APs.
<Huawei> system-view
[Huawei] wlan
[Huawei-wlan-view] location-profile name huawei
[Huawei-wlan-location-prof-huawei] private mu-enable
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207664

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next