No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
aaa-authen-bypass

aaa-authen-bypass

Function

The aaa-authen-bypass command sets the bypass authentication timeout interval.

The undo aaa-authen-bypass command cancels the bypass authentication timeout interval.

By default, no bypass authentication timeout interval is set.

Format

aaa-authen-bypass enable time time-value

undo aaa-authen-bypass enable

Parameters

Parameter

Description

Value

enable

Enables remote bypass authentication.

-

time time-value

Specifies the bypass authentication timeout interval.

The value is an integer that ranges from 1 to 1440, in minutes.

Views

System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

This command applies to the scenarios that require fast authentication response. When a user in a user domain where multiple authentication modes (for example, RADIUS authentication and local authentication) are configured, bypass authentication is enabled, and the bypass authentication timeout interval is configured, the user will be authenticated using the local authentication mode and the bypass authentication timer is enabled simultaneously if the RADIUS server does not respond to the authentication request. When other users in the same domain are authenticated during the configured bypass authentication timeout interval, the users are directly authenticated using the local authentication mode, so that the users can be authenticated without waiting until the RADIUS server responds to their authentication requests, accelerating the authentication response.

Precautions

When only one authentication mode is configured in a user domain and the bypass authentication timer is enabled, other users in the same domain are directly considered to fail the authentication during the bypass authentication timeout interval.

Example

# Set the bypass authentication timeout interval to 3 minutes.

<Huawei> system-view
[Huawei] aaa-authen-bypass enable time 3
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 249487

Downloads: 140

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next