No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
auto-defend threshold

auto-defend threshold


The auto-defend threshold command sets the checking threshold for attack source tracing.

The undo auto-defend threshold command restores the default checking threshold for attack source tracing.

By default, the checking threshold for attack source tracing is 128 pps.


auto-defend threshold threshold

undo auto-defend threshold


Parameter Description Value
threshold Specifies the checking threshold for attack source tracing. The value is an integer that ranges from 1 to 65535, in pps.


Attack defense policy view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

After attack source tracing is enabled, you can set the checking threshold for attack source tracing. When the number of sent protocol packets from an attack source in a specified period exceeds the checking threshold, the device traces and logs the attack source.


Attack source tracing has been enabled using the auto-defend enable command.


If you run the auto-defend threshold command in the same attack defense policy view multiple times, only the latest configuration takes effect.

After the auto-defend enable command is executed, the device traces the attack source based on the default threshold, and logs the attack source.


# Set the checking threshold for attack source tracing in the attack defense policy named test to 200 pps.

<Huawei> system-view
[Huawei] cpu-defend policy test
[Huawei-cpu-defend-policy-test] auto-defend enable
[Huawei-cpu-defend-policy-test] auto-defend threshold 200
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211361

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next